There was a nice basic tutorial posted on YouTube yesterday on S&T2009.  Take a look and leave him some comments.

Thank you egibby for posting the video – hope you like the software.

[also on YouTube]

I have been asked how to do this enough times that I need to do a blog post on it.

If you want to use Streets & Trips with your DeLorme GPS including:

• USB Earthmate GPS
• Earthmate GPS LT series
• Earthmate GPS PN series
• Earthmate GPS BT-20

It can be done.  You’ll need to install the DeLorme Serial Emulation Driver so that your DeLorme GPS can be recognized by Microsoft Streets & Trips (and other NMEA 0183 compliant mapping applications).

Note: This driver is not for use with the 64bit version of Windows. This driver is also not supported when coming out of sleep or hibernation mode.

Before installing this update, plug the Earthmate GPS into an available USB Port to allow Windows to recognize the GPS as an HID device.

1. Click here to download the serial emulation driver (file size: 14 MB).
2. Save the file to the desktop.
3. Locate DeLorme Serial Emulator1.1.exe and double-click it.
4. Click Next.
5. Select the "I accept the terms of this license agreement" option.
6. Click Next.
7. Restart the computer when prompted.
   Note: The installation will resume once the computer has restarted.
8. Click Next.
9. Click Finish.
10. Right-click on the DeLorme Serial Emulator system tray icon and select Ports... from the pop-up menu.
11. Select NMEA next to the COM Port you wish to use and close the utility.
12. Open the mapping application.
13. In the GPS Settings, select NMEA as the device and the COM port you selected in step 11 as the COM port the device is connected to.
14. Start the GPS.

For further details and how to configure the emulator please visit the DeLorme link below:

http://www.delorme.com/support/supporttemplate.aspx?id=319